Search DCCconcepts
Please take advantage of our search feature to easily find products, videos, manuals, advice and more!
1. PowerBase Micro Screws (60 Pack)
PowerBase Micro Screws (60 Pack) Approximately 30 each of 1.0mm x 4mm and 0.8mm x 3mm blackened Pan head screws PLUS matching drill. Click to view the rest of our Powerbase Range. Advice on fitting PowerBase can be found in our online manual.
2. Countersunk Screw Set 8x Vials with 60 screws in each
Countersunk Screw Set 8x Vials with 60 screws in each. Countersunk head micro-screw set includes 60+ each 1.0x3mm, 1.0x5mm, 1.0x8mm, 1.5x4mm, 1.5x6mm, 1.5x8mm 2.0x5mm, & 2.0x8mm. Click to view other sizes in our screws range.
3. Pan Head Screw Set 8x Vials with 60 screws in each
Pan Head Screw Set 8x Vials with 60 screws in each. Pan head micro-screw set includes 60+ each 1.0x3mm, 1.0x5mm, 1.0x8mm, 1.5x4mm, 1.5x6mm, 1.5x8mm 2.0x5mm, & 2.0x8mm.. Click to view other sizes in our screws range.
5. DCCconcepts ADiA and Cobalt ULTRA Information Hub
DCCconcepts ADiA Intelligent Accessory decoders have some very special features which make them totally unique. – Fits snugly in the recess in every Cobalt turnout motor (using the pre-fitted foam pad) or you can mount it seperately with the screws provided. – Simple to wire without soldering – Plug-and-play connectors for DCCconcepts magnetic or infra-red […]
9. Crossover pack: 2x Cobalt-SS and Accessories
Cobalt-SS Crossover pack: 2x Cobalt-SS and Accessories (Requires Cobalt-SS control board to operate – not included in this pack) Each of the two independent outputs of the Cobalt-SS control board can actually power several motors simultaneously. Therefore it seemed sensible to make a separate crossover pack to make the creation of loops and crossovers easy and […]
10. 12x Cobalt-SS with Controllers & Accessories
Cobalt-SS – Small, Reliable, Super-Smooth Above-Board Turnout Motors, ready for DC or DCC use.
11. 6x Cobalt-SS with Controllers & Accessories
Cobalt-SS – Small, Reliable, Super-Smooth Above-Board Turnout Motors, ready for DC or DCC use.
12. 2x Cobalt-SS with Controller & Accessories
Cobalt-SS 2 Pack – Small, Reliable, Super-Smooth Above-Board Turnout Motors, ready for DC or DCC use. Cobalt-SS 2 Pack – This pack contains 2x Cobalt-SS Above-Board Point Motors with “Plug & Play” leads to connect to the Control Board. They are ready for installation and connection with everything needed already in the pack. Cobalt-SS can be […]
13. PowerBase Magnet Pack N Scale
PowerBase Magnet Pack N Scale For N or TT scale & Narrow Gauge. Contains 12 magnets and 12+ housings, plus 30+ fine blackened pan head screws to assist magnet mounting.
14. PowerBase Value Pack N Scale
PowerBase Value Pack N Scale. For N or TT scale and narrow gauge. This economical value pack contains approx. 5 Metres of PowerBase centipede plates, 12 magnets and 12+ housings, plus 30+ blackened pan head screws to assist magnet mounting. (enough for 2-3 N or narrow gauge or very small OO/HO locomotivies). Click to view […]
15. PowerBase Magnet Pack OO/HO Scale
PowerBase Magnet Pack OO/HO Scale For OO/HO and larger scales. Contains 12 magnets and 12+ housings, plus 30+ fine blackened pan head screws to assist magnet mounting. Click to view the rest of our PowerBase range.
18. Mega Screw Set 16x 60 Vials (w/20 Drill Bit Set)
Mega Screw Set 16x 60 Vials (w/20 Drill Bit Set) Mega set of 16 vials each containing 60 panhead (60x 1.0x3mm, 60x 1.0x5mm, 60x 1.0x8mm, 60x 1.5x4mm, 60x 1.5x6mm, 60x 1.5x8mm, 60x 2.0x5mm, & 60x 2.0x8mm) 60 countersunk screws (60x 1.0x3mm, 60x 1.0x5mm, 60x 1.0x8mm, 60x 1.5x4mm, 60x 1.5x6mm, 60x 1.5x8mm, 60x 2.0x5mm, & 60x […]
19. Nut Driver Set
Using the DCD-NND.3 – Nut Driver Set One Handle and three of the most important Nut Driver sizes for use with model railways and similar hobbies.. Have you ever wondered why some modellers keep using the same tools, year in, year out, while others always seem to need to buy replacements? This usually happens because with […]
20. Screw and Nut Driver Set
Using DCD-SND.12 – Screw and Nut Driver Set Three Handles, Three essential (-) type screwdriver tips, 3 essential (+) type screwdriver tips and 3 important Nut Drivers for use with model railways and similar hobbies. Have you ever wondered why some modellers keep using the same tools, year in, year out, while others always seem […]
23. Wiper Pickups (12 Pack)
Wiper Pickups (12 Pack) 12 pair/sets of top quality easy to install wiper type pickups. These super easy to mount pickups use the classic ‘wiper method’ and are supplied ready to mount with no assembly. – They even come complete with screws for easy installation (they can also be glued of course). The finger contacts […]
24. Terminal Strip 12-Way Pluggable (2 Pairs)
Terminal Strip 12-Way Pluggable (2 Pairs) Two pairs of 12 way pluggable connectors, suitable for heavy power connection between baseboards or perhaps the creation of an ‘easy disconnection’ structure between DCC systems and layout, these heavy duty tag strips are able to take a wide range of wires. They are a very strong connector that […]
25. Inter-Baseboard Connectors (2 Pack)
These clever pluggable screw-terminal connectors allow you to easily connect baseboard power with plug-and-socket connections! Suitable for DC or DCC on systems up to 5 Amps. Contents: 2x Pluggable Screw-Terminal Connectors Ferruled Connector Wire Fixing Screws Spare Ferrules Need a crimping tool? CLICK HERE
26. Cobalt Turnout Motor Installation Template
This superb and easy-to-use kit contains everything you need to accurately position DCCconcepts under-board Cobalt motors on your layout. It includes: 2 Cobalt Installation Templates 1 12mm Spade Drill Bit 1 Countersink Drill Bit 1 Pilot Drill Bit 6 Cobalt Point Motor Throw Bars 6 Cobalt Throw Bar Securing Screws 24 Cobalt Mounting Screws
27. Cobalt AlphaSwitch Add-on Pack – White (12 Pack)
Cobalt AlphaSwitch Add-on Pack – White (12 Pack) We have created these add-on switch packs so that you can add a second switch where needed, for example when using one on each straight leg of a crossover and another in the middle. As with Alpha-Switch, there are 4 colours available. DCP-ATR switches have Red LEDs, […]
28. Cobalt AlphaSwitch Add-on Pack – Red (12 Pack)
Cobalt AlphaSwitch Add-on Pack – Red (12 Pack) We have created these add-on switch packs so that you can add a second switch where needed, for example when using one on each straight leg of a crossover and another in the middle. As with Alpha-Switch, there are 4 colours available. DCP-ATR switches have Red LEDs, […]
29. Cobalt AlphaSwitch Add-on Pack – Green (12 Pack)
Cobalt AlphaSwitch Add-on Pack – Green (12 Pack) We have created these add-on switch packs so that you can add a second switch where needed, for example when using one on each straight leg of a crossover and another in the middle. As with Alpha-Switch, there are 4 colours available. DCP-ATR switches have Red LEDs, […]
30. Cobalt AlphaSwitch Add-on Pack – Blue (12 Pack)
Cobalt AlphaSwitch Add-on Pack – Blue (12 Pack) We have created these add-on switch packs so that you can add a second switch where needed, for example when using one on each straight leg of a crossover and another in the middle. As with Alpha-Switch, there are 4 colours available. DCP-ATR switches have Red LEDs, […]
31. Alpha Switch-i (6 Pack) (Red/Green)
Alpha Switch-i (6 Pack) (Red/Green) – Perfect for use with Alpha Mimic and ESP to create almost 100% solder-free control panels that can even be totally wire-free if you wish! Control panels need feedback so they can show the way things are operating, but most switches need complex contacts to make it possible. Alpha Switch-i […]
32. Cobalt-S Solder-Free Harness (3 Pack)
Cobalt-S Solder-Free Harness (3 Pack) Something special for those who find soldering complex wiring difficult: Three complete harnesses for Cobalt-S levers complete with 9-way spring connectors for easy solder-free installation. Complete with twelve mounting screws. Click to view our Cobalt-S Levers.
33. Cobalt Key Spares (Single Pack)
A set of all fittings usually packed with Cobalt, including throw wire, fulcrum, fulcrum screw and 5 mounting screws. (Suitable for all Cobalt variants) Ideal if you need a replacement Cobalt throw arm for replacing your point motor on another layout.
34. Cobalt Spare Throw Wires x12
A pack of 12x spare 73mm throw wires and 3x spare wire securing screws compatible with all Cobalt blue motors: Cobalt iP Digital Cobalt iP Analog Cobalt Classic Omega Cobalt Digital Cobalt Classic We strongly recommend that you use a file or cut-off wheel to adjust wire length as the spring wire will damage cutters.
35. Cobalt iP Digital (72pc Club Pack)
Cobalt iP Digital “Intelligent Power” DCC Digital Turnout Motor 72 Cobalt iP Digital “Intelligent Power” DCC Digital Turnout Motors with all installation accessories including mounting screws and one of our very popular double-sided foam mounting pads. The Cobalt-iP “Club Pack” is designed to support those building large layouts such as cooperative layout builds and clubs. The […]
36. Cobalt iP Digital (12 Pack)
Cobalt iP Digital (12 Pack) – “Intelligent Power” DCC/DIGITAL Point Motors
37. Cobalt iP Digital (6 Pack)
Cobalt iP Digital (6 Pack) “Intelligent Power” DCC/DIGITAL Point Motors
38. Cobalt iP Digital (Single Pack)
Cobalt iP Digital “Intelligent Power” DCC/DIGITAL Point Motor
39. Cobalt iP Analog (72pc Club Pack)
Cobalt iP Analog “Intelligent Power” Turnout Motor Seventy-two Cobalt iP Analog “Intelligent Power” Turnout Motors with all installation accessories including mounting screws and one of our very popular double-sided foam mounting pads. The Club Pack is ONLY available directly from DCCconcepts. Suitable for all gauges from large to very small, we even have an easy-to-use Cobalt Installation […]
40. Cobalt iP Analog (12 Pack)
Cobalt iP Analog “Intelligent Power” Turnout Motor Twelve Cobalt iP Analog “Intelligent Power” Turnout Motors with all installation accessories including mounting screws and one of our very popular double-sided foam mounting pads. Suitable for all gauges from large to very small, we even have an easy-to-use Cobalt Installation Template complete with Tools! The Cobalt iP’s super-low […]
41. Cobalt iP Analog (6 Pack)
Cobalt iP Analog “Intelligent Power” Turnout Motor Six Cobalt iP Analog “Intelligent Power” Turnout Motors with all installation accessories including mounting screws and one of our very popular double-sided foam mounting pads. Suitable for all gauges from large to very small, we even have an easy-to-use Cobalt Installation Template complete with Tools! The Cobalt iP’s super-low […]
42. Cobalt iP Analog (Single Pack)
Cobalt iP Analog “Intelligent Power” Turnout Motor One Cobalt iP Analog “Intelligent Power” Turnout Motor with all installation accessories including mounting screws and one of our very popular double-sided foam mounting pads. Suitable for all gauges from large to very small, we even have an easy-to-use Cobalt Installation Template complete with Tools! The Cobalt iP’s super-low […]
44. Intelligent 3-Address Accessory Decoder (3-Pack)
DCCconcepts ADiA decoders have some very special features which make them totally unique. – Fits snugly in the recess in every Cobalt turnout motor (using the pre-fitted foam pad) or you can mount it seperately with the screws provided. – Simple to wire without soldering – Plug-and-play connectors for DCCconcepts magnetic or infra-red detectors – […]
45. Intelligent 3-Address Accessory Decoder
DCCconcepts ADiA Intelligent Accessory decoders have some very special features which make them totally unique. – Fits snugly in the recess in every Cobalt turnout motor (using the pre-fitted foam pad) or you can mount it seperately with the screws provided. – Simple to wire without soldering – Plug-and-play connectors for DCCconcepts magnetic or infra-red […]