Advice: Soldering – The Black Art De-mystified (Part 3)

We hope that you find this information useful. It has been written by modellers, for modellers.

We’ve done our best to verify all information it may contain and all ideas, recommendations or techniques within it have, where possible, also been “tried and tested” by experienced modellers.

Where circuits and wiring are shown, these have also been checked or tested, however case-by-case, it is possible that exact wire positions may vary with orientation of things like turnout motors. Switch and contact position may also vary with time due to product evolution, so check carefully when using them.

If you are not sure, feel free to ask. Please be as specific with questions and include as much information as possible with any enquiry so we have the best possible chance of giving you a quick and accurate response. We will always do our best to help.

If you have any questions or feedback regarding this advice, please feel free to contact us at salesuk@dccconcepts.com or via the enquiries form on our Contact Us page.

SOLDERING part 3