Search DCCconcepts
Please take advantage of our search feature to easily find products, videos, manuals, advice and more!
1. 65 Watt Hand-Held “Basics” Soldering Iron
AT571 65 Watt Hand-Held Soldering Iron with Digital Temperature Control, Additional Tip, Solder and Flux The AT571 is a 65 watt temperature-dial controlled soldering iron which is the perfect choice for those who will mainly solder track or wiring around the layout as there is no “base station” to accidentally pull off the layout top! […]
2. C3.0 Type Tip for ST2150D Soldering Iron
T-3C Tip – A medium C type tip for DCS-ST2150D. Tip face is a 3.0mm angled flat giving you the ideal tip for soldering mid sized brass parts, track wiring and the like.
3. C3.0 Type Tip for ST2080D Soldering Iron
T-3C Tip – A medium C type tip for DCS-ST2080D. Tip face is a 3.0mm angled flat giving you the ideal tip for soldering mid sized brass parts, track wiring and the like.
4. T2.4D Type Tip for ST2080D Soldering Iron
T-2.4D Tip – A medium D type tip for DCS-ST2080D. Tip face is a 2.4mm with both a ‘line’ and ‘face’ soldering area. This tip can be used for soldering in narrow locations and is ideal for circuit-board use, soldering chip parts, ‘drag’ soldering, tinning wire and point soldering.
5. 65 Watt Soldering Station – Complete Kit
DCS-AT689 65 watt Soldering Station with Digital Temperature Control. This full kit contains everything you need to get started: 1x DCS-AT689A Soldering Station 1x Solder Stand and Sponge 1x DCS-S179 Sapphire Solder 1x DCS-SFNC Sapphire Solder Flux 1x DCS-T2C Spare Tip The DCS-AT689A is a very good choice for those doing almost anything on the […]
6. 65 Watt Hand-Held Soldering Iron – Complete Kit
ST-2065D 65 Watt Hand-Held Soldering Iron with Digital Temperature Control, Additional Tip, Solder and Flux This kit gives you everything you need to get started on your soldering journey – The ST-2065D is a 65 watt temperature controlled soldering iron which is the perfect choice for those who will mainly solder track or wiring around […]
7. Desoldering Braid
Removes excess solder and cleans up solder joints. Essential for clean kit building in brass and for removal of parts in electronics. Desoldering Braid gives you a clean solder pad to work with. Pack contains 3.0m at 2.5mm width. Essentials & Accessories Solder Flux Soldering Irons Soldering Advice
8. Advice: Soldering – The Black Art De-mystified (Part 3)
SOLDERING part 3
9. Advice: Soldering – The Black Art De-mystified (Part 2)
SOLDERING part 2
10. Advice: Soldering – The Black Art De-mystified (Part 1)
SOLDERING part 1
11. AE Model Frog Power Control (6 Pack)
AE Model Frog Power Control (6 Pack) Traditional solenoid turnout motors often have a real shortcoming… they are not equipped with a way to reliably change the polarity of the turnout frog unless you buy an expensive mechanical switch to add to them, which in turn means harder installation, and, because of the added load […]
12. AE Model Frog Power Control (3 Pack)
AE Model Frog Power Control (3 Pack) Traditional solenoid turnout motors often have a real shortcoming… they are not equipped with a way to reliably change the polarity of the turnout frog unless you buy an expensive mechanical switch to add to them, which in turn means harder installation, and, because of the added load […]
13. AE Model Frog Power Control
AE Model Frog Power Control (Single Pack) Traditional solenoid turnout motors often have a real shortcoming… they are not equipped with a way to reliably change the polarity of the turnout frog unless you buy an expensive mechanical switch to add to them, which in turn means harder installation, and, because of the added load […]
14. S179 Solder, No Clean Flux and Fibreglass Brush
DCCconcepts Sapphire Solder, Flux and Fibreglass Brush Contents: 1x DCS-S179 Sapphire 179 Solder (Super Versatile) 1x DCS-SFNC Sapphire No-Clean Flux 50ml 1x DCT-FBS Medium Fibreglass Brush This combination makes everyone a soldering expert! Sapphire 179 solder is 0.6mm diameter solder which flows beautifully. It is perfect for brass, copper, wiring, trackwork, soldering to nickel silver […]
15. DCCconcepts ADiA and Cobalt ULTRA Information Hub
DCCconcepts ADiA Intelligent Accessory decoders have some very special features which make them totally unique. – Fits snugly in the recess in every Cobalt turnout motor (using the pre-fitted foam pad) or you can mount it seperately with the screws provided. – Simple to wire without soldering – Plug-and-play connectors for DCCconcepts magnetic or infra-red […]
16. Sapphire Solder & Flux Combo
Combo Pack – DCCconcepts Sapphire Solder and Flux Contents: 1x DCS-S179 Sapphire 179 Solder (Super Versatile) 1x DCS-SFNC Sapphire No-Clean Flux 50ml This combination makes everyone a soldering expert! Sapphire 179 solder is 0.6mm diameter solder which flows beautifully. It is perfect for brass, copper, wiring, trackwork, soldering to nickel silver or even to steel. […]
17. T-K Tip (for DCS-ST2065, ST60, ST80 & AT689A)
T-K Tip for DCS-ST2065, DCS-ST60, DCS-ST80 & DCS-AT689A irons. This type has a shape like a knife and is capable of soldering by applying the tip in 3 ways: line, face and point. It is used for soldering at narrow pitches, correction of bridging and drag soldering. Essentials & Accessories Solder Flux Soldering Irons Soldering Advice
18. T-1.2D Tip (for DCS-ST2065D, ST60, ST80 & AT689A)
T-1.2D Tip – A medium D type tip for DCS-ST2065D, DCS-ST60, DCS-ST80 & DCS-AT689A irons. Tip face is a 1.2mm with both a ‘line’ and ‘face’ soldering area. This tip can be used for soldering in narrow locations and is ideal for circuit-board use, soldering chip parts, ‘drag’ soldering, tinning wire and point soldering. Essentials & […]
19. T-3C Tip (for DCS-ST2065, ST60, ST80 & AT689A)
T-3C Tip – A medium C type tip for DCS-ST2065, DCS-ST60, DCS-ST80 & DCS-AT689A irons. Tip face is a 3.0mm angled flat giving you the ideal tip for soldering mid sized brass parts, track wiring and the like. Essentials & Accessories Solder Flux Soldering Irons Soldering Advice
20. T-2C Tip (for DCS-ST2065, ST60, ST80 & AT689A)
T-2C Tip – A medium C type tip for DCS-ST2065D, DCS-ST60, DCS-ST80 & DCS-AT689A. Tip face is a 2.0mm angled flat giving you the ideal tip for soldering mid sized brass parts, track wiring and the like. Probably the most common tip size used in the hobby (for good reason). Essentials & Accessories Solder Flux […]
21. T-1C Tip (for DCS-ST2065D, ST60, ST80 & AT689A)
T-1C Tip – A medium-small C type tip for DCS-ST2065D, DCS-ST60, DCS-ST80 & DCS-AT689A . Tip face is a 1.0mm angled flat giving you real versatility. Nice for soldering smaller brass parts and larger PCB connections. Essentials & Accessories Solder Flux Soldering Irons Soldering Advice
22. Cobalt iP Analogue and Omega Switch Pack with LEDs (RED & GREEN)
SIX plug & play pre-wired switches (CBSGR) with 12 pre-terminated plug-in green LEDs. Available with Red, Green or Red+Green bicolour LEDs, these switch packs are easy to use and create the perfect combination when used for control of Cobalt iP Analog, Cobalt Omega Analog and other slow-action turnout motors. All done with less soldering, faster […]
23. Cobalt iP Analogue and Omega Switch Pack with LEDs (RED)
SIX plug & play pre-wired switches (CBSRD) with 12 pre-terminated plug-in green LEDs. Available with Red, Green or Red+Green bicolour LEDs, these switch packs are easy to use and create the perfect combination when used for control of Cobalt iP Analog, Cobalt Omega Analog and other slow-action turnout motors. All done with less soldering, faster […]
24. Cobalt iP Analogue and Omega Switch Pack with LEDs (GREEN)
SIX plug & play pre-wired switches (CBSGR) with 12 pre-terminated plug-in green LEDs. Available with Red, Green or Red+Green bicolour LEDs, these switch packs are easy to use and create the perfect combination when used for control of Cobalt iP Analog, Cobalt Omega Analog and other slow-action turnout motors. All done with less soldering, faster […]
26. Sapphire 179 Solder (Super Versatile)
Sapphire 179 Leaded Solder (Super Versatile) The solder that in combination with our Sapphire No Clean Flux, makes everyone an expert! Sapphire 179 solder is 0.6mm diameter solder which flows absolutely brilliantly. It is perfect for brass, copper, wiring, trackwork, soldering to nickel silver or steel and it even solders spring steel and to 300 […]
27. Sapphire 145 (Detail Solder)
Sapphire 145 (Detail Solder) Sapphire 145 is 0.8mm diameter solder with no peaking and which flows absolutely brilliantly. It has a very narrow melt range which makes quick joints on detail parts a pleasure, yet it flows exceptionally well for long seams on brass kits. Whilst we recommend that it is used with our Sapphire […]
29. Tip Reviver
Soldering iron tip reconditioner and reviver. Gives a new tinning coat to the iron tip, restoring its ability to transfer heat quickly. Simply allow your iron to heat up, then push the tip into this compound – watch as it is re-tinned and restored to as-new condition! Essentials & Accessories Solder Flux Soldering Irons Soldering […]
30. Iron Stand (w/Sponge)
It is important to keep you and your soldering iron safe when you are not holding it! This high quality stand will protect the soldering iron tip and keep you and your workbench away from unexpected painful moments. This top quality stand will last forever. It is recommended for ALL hand-held soldering irons sold by […]
31. Brass Wool Tip Cleaner
Brass Wool Tip Cleaner – A convenient pot with a wad of activated brass ‘wool’ which will take all excess solder from the tip and give it a great clean. Never use anything more abrasive than this on your tip or you will shorten tip life considerably! Essentials & Accessories Solder Flux Soldering Irons Soldering […]
32. Nut Driver Set
Using the DCD-NND.3 – Nut Driver Set One Handle and three of the most important Nut Driver sizes for use with model railways and similar hobbies.. Have you ever wondered why some modellers keep using the same tools, year in, year out, while others always seem to need to buy replacements? This usually happens because with […]
33. Screw and Nut Driver Set
Using DCD-SND.12 – Screw and Nut Driver Set Three Handles, Three essential (-) type screwdriver tips, 3 essential (+) type screwdriver tips and 3 important Nut Drivers for use with model railways and similar hobbies. Have you ever wondered why some modellers keep using the same tools, year in, year out, while others always seem […]
34. High Quality Power Bus Strippers
DCCconcepts heavy duty BUS wire strippers are the best time saver ever! Save HOURS when installing the main power bus and if you plan well you can also do it with NO need for cuts and breaks in it at all with this really high quality tool. Machined high quality alloy steel jaws strip all […]
35. Bus Terminal Tags (50 Pack)
Bus Terminal Tags (50 Pack) Pack of 50 ‘tags.’ There is no easier way to mount and secure the power bus than with these tags. Left and right power bus is secured in the larger tag holes, and droppers are easily connected by soldering into the corresponding eyelet holes. Pre-tinned for easy soldering, tags also […]
36. Bus Terminal Tags (25 Pack)
Bus Terminal Tags (25 Pack) Pack of 25 ‘DCC-Tags’. There is no easier way to mount and secure the power bus (With ZERO need for cutting) than with these tags. Left and right power bus is secured in the larger tag holes, and droppers are easily connected by soldering into the corresponding eyelet holes. Pre-tinned […]
37. Cobalt Barrel-Plug Adapter (3 Pack)
A pack of three coaxial DC barrel plug adapters that will let you connect bare wires to a DC-plug fitted power supply that takes away the need to cut the plug off and get the soldering iron out. Suitable for the following DCCconcepts power supplies: DCP-PS12 DCP-12.3.XX DCP-18.2.XX DCP-18.5.XX
38. Alpha Mimic Add-On Building Lighting Discs + Leads
Alpha Mimic Add-On Building Lighting Discs + Leads allows you to add more Lighting Discs to your Alpha Mimic Plug & Play Controllable Building Lighting system. This pack also allows for analog (or “DC”) installation of Alpha Mimic Building Lighting without the DCC control board. Simply supply DC power to the Lighting Disc to illuminate […]
39. Cobalt Alpha Switch Y-Connectors (3 Pack)
Cobalt Alpha Switch Y-Connectors (3 Pack) Need to parallel 2 or more Alpha-Switches or perhaps have one switch control two devices? Even this is no problem… this “2 into 1” Y adapter PCB takes two switches one side, one on the other, allowing you to just plug them together – no wire cutting, stripping or […]
40. Alpha Mimic Plug & Play Controllable Building Lighting
Alpha Mimic Plug & Play Controllable Building Lighting allows you to easily install and control building lighting conveniently powered from your DCC bus! Simple installation! Connect the mimic control board to your DCC bus. Install the lighting discs into your buildings. Connect the mimic plug cable extensions. Plug your lights into the mimic control board. […]
41. Cobalt-S Solder-Free Harness (3 Pack)
Cobalt-S Solder-Free Harness (3 Pack) Something special for those who find soldering complex wiring difficult: Three complete harnesses for Cobalt-S levers complete with 9-way spring connectors for easy solder-free installation. Complete with twelve mounting screws. Click to view our Cobalt-S Levers.
42. Legacy Wired Joiners – Code 75 – Pack of 6
300mm high quality track feed wires pre-soldered to Legacy Rail Joiners. Compatible with Code 75 track from Legacy and equivalent track from all major brands. Super-quick and easy to use – no soldering necessary! Pack contains 6 pairs Extend easily using iLink Connectors (DCW-iL.25) and DCCconcepts Red & Black dropper wire (RCA-RBW.5)
43. Legacy Wired Joiners – Code 100 – Pack of 6
300mm high quality track feed wires pre-soldered to Legacy Rail Joiners. Compatible with Code 100 track from Legacy and equivalent track from all major brands. Super-quick and easy to use – no soldering necessary! Pack contains 6 pairs Extend easily using iLink Connectors (DCW-iL.25) and DCCconcepts Red & Black dropper wire (RCA-RBW.5)
44. Solderless i-Link Connectors (25-pack)
While we really do prefer soldered connections, there are modellers who are unable or do not want to work under the layout with a soldering iron and times and places where its simply not convenient to solder. We therefore looked long and hard at that is available to find the ideal connectors to make it […]
45. Intelligent 3-Address Accessory Decoder (3-Pack)
DCCconcepts ADiA decoders have some very special features which make them totally unique. – Fits snugly in the recess in every Cobalt turnout motor (using the pre-fitted foam pad) or you can mount it seperately with the screws provided. – Simple to wire without soldering – Plug-and-play connectors for DCCconcepts magnetic or infra-red detectors – […]
46. Intelligent 3-Address Accessory Decoder
DCCconcepts ADiA Intelligent Accessory decoders have some very special features which make them totally unique. – Fits snugly in the recess in every Cobalt turnout motor (using the pre-fitted foam pad) or you can mount it seperately with the screws provided. – Simple to wire without soldering – Plug-and-play connectors for DCCconcepts magnetic or infra-red […]
47. Legacy Models Intelligent Detector (3-Pack)
Legacy Models Intelligent Detector 3-Pack (LM-iD.3) The Legacy LM-iD is an intelligent Inductive detector that is easy to install, trouble free and exceptionally reliable. LM-iD works everywhere: On layouts built in every common modelling scale, with every brand of DCC system and with every computer control app IO input that can sense a high/low detection. […]
48. Legacy Models Intelligent Detector (Single Pack)
Legacy Models Intelligent Detector Single Pack (LM-iD.1) The Legacy LM-iD is an intelligent Inductive detector that is easy to install, trouble free and exceptionally reliable. LM-iD works everywhere: On layouts built in every common modelling scale, with every brand of DCC system and with every computer control app IO input that can sense a high/low […]
49. Zen SUPER high power stay alive x 3 (Value pack)
Zen SUPER high 2-wire power stay alive has exceptional power storage. In fact, once charged, they have enough power to run an average OO or HO Locomotive more than two metres with the track power removed! They are available singly (DCD-SA2-SS.1) (was DCD-ZNSSA-1) or in cost-saving packs of three (DCD-SA2-SS.3) (was DCD-ZNSSA-3). Click HERE for a […]
50. Zen SUPER high power stay alive x1
Zen SUPER high 2-wire power stay alive has exceptional power storage. In fact, once charged, they have enough power to run an average OO or HO Locomotive more than two metres with the track power removed! They are available singly (DCD-SA2-SS.1) (was DCD-ZNSSA-1) or in cost-saving packs of three (DCD-SA2-SS.3) (was DCD-ZNSSA-3). Click HERE for a […]